Hoses, Fittings and Valves!

Steel hose ferrules are used with barbed hose fittings and are crimped on large-diameter hydraulic hose presses to create a strong, permanent and tamper-resistant hose connection. Ferrule sizes refer to the inside diameter of the ferrule before crimping. Sizes shown are most commonly used with our hoses. Standard ferrules are plated carbon steel. Short ferrules are generally suitable for attach G33 style combination nipples. Longer ferrules are preferred for G65 cam-locks.


Choosing a Steel Sleeve

In general, sleeves should be at least 1/4" shorter than the hose barb, and placed just ahead of the end barb on the fitting. Approximate barb lengths for popular fittings are given in the table below. For steam and for high pressure air service in larger sizes, G29C interlocking clamps should be used instead of steel sleeves.

HoseFitting style and barb length
SizeG23SG25G33G65
3/4"2 3/8"2 1/8"1 3/8"1 7/8"
1"2 3/4"2 3/4"1 1/2"2 1/4"
1 1/4"3 1/2"1 1/2"2 1/4"
1 1/2"3 1/2"1 3/4"2 1/2"
2"4"2 1/8"2 3/4"
2 1/2"2 3/4"3 1/4"
3"3"4"
4"3 7/8"4 1/4"
5"4 5/8"4 3/4"
6"5 1/8"5 7/8"

Add to cart:

  • Model: G3S Information


IVAC (Wide)

Westkam (Wide)

Copyright © 2017 hose-fittings-valves.com. Powered by Netfirms and Zen Cart